document number: 83504 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.9, 10-dec-08 519 optocoupler, phototriac output, 250 v v drm k3010p, k3010pg series vishay semiconductors description the k3010p, k3010pg series co nsists of a photo-transistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-pin plastic dual inline package vde standards these couplers perform safety functions according to the following equipment standards: ? din en 60747-5-5 (vde 0884) optocoupler for electric al safety requirements ? iec 60950/en 60950 office machines (applied for reinforced isolation for mains voltage 400 v rms ) ? vde 0804 telecommunication apparatus and data processing ? iec 60065 safety for mains-operated electronic and related household apparatus agency approvals ? ul1577, file no. e76222 system code c, double protection ? bsi: bs en 41003, bs en 60065 (bs 415), bs en 60950 (bs 7002), certificat e number 7081 and 7402 ? din en 60747-5-5 (vde 0884) ? fimko (seti): en 60950, certificate no. 12398 features ? isolation materials according to ul 94-vo ? pollution degree 2 (din/vde 0110 resp. iec 60664) ? climatic classification 55/100/21 (iec 60068 part 1) ? special construction: therefore, extra low coupling capacity of typical 0.2 pf, high common mode rejection ?i ft offered in 3 groups ? rated impulse voltage (t ransient overvoltage) v iotm = 6 kv peak ? isolation test voltage (partial discharge test ) v pd = 1.6 kv ? creepage current resistance according to vde 0303/ iec 60112 comparative tracking index: cti = 275 ? thickness through insulation 0.75 mm ? lead (pb)-free component ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec applications ?monitors ? air conditioners ? line switches ? solid state relay ? microwave ? circuits for safe protective separation against electrical shock according to sa fety class ii (reinforced isolation): - for appl. class i - iv at mains voltage 300 v - for appl. class i - iii at mains voltage 600 v according to din en 60747-5-5 (vde 0884) note for additional information on the availabl e options refer to option information. g = leadform 10.16 mm; g is not marked on the body. 17221 6 54 2 3 1 a (+) c (?) n c ~ ~ n ote: pin 5 m u st not b e connected v de order information part remarks k3010p 15 ma, i ft , v drm = 250 v, dip-6 k3011p 10 ma, i ft , v drm = 250 v, dip-6 k3012p 5 ma, i ft , v drm = 250 v, dip-6 k3010pg 15 ma, i ft, v drm = 250 v, dip-6 400 mil k3011pg 10 ma, i ft, v drm = 250 v, dip-6 400 mil K3012PG 5 ma, i ft, v drm = 250 v, dip-6 400 mil
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 83504 520 rev. 1.9, 10-dec-08 k3010p, k3010pg series vishay semiconductors optocoupler, phototriac output, 250 v v drm notes (1) t amb = 25 c, unless otherwise specified. stresses in excess of the absolute maximum ratings can cause per manent damage to the device. functional operation of the device is not implied at these or any other c onditions in excess of t hose given in the operational sections of this document. exposure to abs olute maximum ratings for extended periods of the time can adversely affect reliability. notes (1) t amb = 25 c, unless otherwise specified. minimum and maximum values are testing requi rements. typical values are characteristic s of the device and are the result of eng ineering evaluation. typical values are for information only and are not part of the testing requirements. (2) test voltage must be applied within dv/dt ratings. (3) i ft is defined as a mini mum trigger current. absolute maximum ratings (1) parameter test condition symbol value unit input reverse voltage v r 5v forward current i f 80 ma forward surge current t p 10 s i fsm 3a power dissipation p diss 100 mw junction temperature t j 100 c output off state output terminal voltage v drm 250 v on state rms current i trm 100 ma peak surge current, non-repetitive t p 10 ms i tms 1.5 a power dissipation p diss 300 mw junction temperature t j 100 c coupler isolation test voltage (rms) t = 1 min v iso 3750 v rms total power dissipation p tot 350 mw ambient temperature range t amb - 40 to + 85 c storage temperature range t stg - 55 to + 100 c soldering temperature 2 mm from case, t 10 s t sld 260 c electrical characteristics (1) parameter test condition part symbol min. typ. max. unit input forward voltage i f = 50 ma v f 1.25 1.6 v junction capacitance v r = 0, f = 1 mhz c j 50 pf output forward peak off-state voltage (repetitive) i rdm = 100 na v drm (2) 250 v peak on-state voltage i tm = 100 ma v tm 1.5 3 v critical rate of rise of off-state voltage i ft = 0, i ft = 30 ma, dv/d tcr 10 na dv/d tcrq 0.1 0.2 na coupler (3) collector emitter saturation voltage v s = 3 v, r l = 150 k3010p i ft 815ma k3010pg i ft 815ma k3011p i ft 510ma k3011pg i ft 510ma k3012p i ft 25ma K3012PG i ft 25ma holding current i f = 10 ma, v s 3 v i h 100 a
document number: 83504 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.9, 10-dec-08 521 k3010p, k3010pg series optocoupler, phototriac output, 250 v v drm vishay semiconductors fig. 1 - test circuit for dv/dt cr and dv/dt crq fig. 2 fig. 3 - motor control circuit note according to din en 60747-5-5 (see figure 4). this optocoupler is suitable for safe el ectrical isolation onl y within the safety ratings. compliance with the safety ratings shall be ensured by means of suitable protective circuits. v ~ r s 95 10 8 13 test condition: d v /dt cr v s = 2/3 v drm (sine w a v e) r l = 33 k d v /dt cr q v eff. = 30 v (sine w a v e) r l = 2 k i ft r l i f i ft 95 10 8 14 d v /dt cr highest v al u e of the ?rate of rise of off-state v oltage? w hich does not ca u se any s w itching from the off state to the on state d v /dt cr q highest v al u e of the ?rate of rise of comm u nicating v oltage? w hich does not s w itch on the de v ice again, after the v oltage has decreased to zero and the trigger c u rrent is s w itched from i ft to zero i f = 0 d v /dt cr d v /dt cr q m 95 10 8 15 270 tt l + 5 v 0.1 f v ac ~ gal v anic seperation maximum safety ratings parameter test condition symbol min. typ. max. unit input forward current i s, input 130 ma output power dissipation p s , output 600 mw coupler rated transient voltage v iotm 6kv safety temperature t si 150 c isolation test voltage v iorm 848 v v iorm 600 v rms
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 83504 522 rev. 1.9, 10-dec-08 k3010p, k3010pg series vishay semiconductors optocoupler, phototriac output, 250 v v drm fig. 4 - derating diagram fig. 5 - test pulse diagram for sample test according to din en 60747-5-5/din en 60747-; iec60747 typical characteristics t amb = 25 c, unless otherwise specified fig. 6 - total power dissipation vs. ambient temper ature fig. 7 - forward current vs. forward voltage insulation rated parameters parameter test condition symbol min. typ. max. unit partial discharge test voltage - routine test 100 %, t test = 1 s v pd 1.6 kv v iotm 6kv partial discharge test voltage - lot test (sample test) t tr = 60 s, t test = 10 s, (see figure 5) v pd 1.3 kv insulation resistance v io = 500 v r io 10 12 v io = 500 v, t amb = 100 c r io 10 11 v io = 500 v, t amb = 150 c (construction test only) r io 10 9 0 75 150 225 300 375 450 525 600 675 0 25 50 75 100 125 150 t am b - am b ient temperat u re(c) 95 10925 p si (m w ) i si (ma) t 13930 t 1 , t 2 = 1 to 10 s t 3 , t 4 = 1 s t test = 10 s t stres = 12 s v iotm v pd v io w m v iorm 0 t 1 t test t tr = 60 s t stres t 3 t 4 t 2 0 100 200 300 400 phototransistor i r -diode co u pled de v ice 0204060 8 0100 t am b - am b ient temperat u re (c) p tot - total po w er dissipation (m w ) 9611701 0.1 1 10 100 1000 0 v f - for w ard v oltage ( v ) 96 11 8 62 i f - for w ard c u rrent (ma) 1.6 0.2 1.4 1.2 1.0 0. 8 0.6 0.4 2.0 1. 8
document number: 83504 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.9, 10-dec-08 523 k3010p, k3010pg series optocoupler, phototriac output, 250 v v drm vishay semiconductors fig. 8 - relative threshold forward current vs. ambient temperature fig. 9 - relative on-state vs. ambient temperature fig. 10 - off-state current vs. ambient temperature fig. 11 - collector current vs. forward current package dimensions in millimeters 0.5 0.6 0.7 0. 8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 - 30 - 20 - 10 0 20 30 40 50 60 70 8 0 10 t am b - am b ient temperat u re (c) 96 11922 v s = 3 v r l = 150 i - relati v e threshold for w ard c u rrent ftrel 0.5 0.6 0.7 0. 8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 - 30 - 20 - 10 0 20 30 40 50 60 70 8 0 10 t am b - am b ient temperat u re (c) 96 11923 v - relati v e on-state v oltage tmrel i f i ft i t = 100 ma = 1 10 100 20 30 40 50 60 70 8 0 90 100 t am b - am b ient temperat u re (c) 96 11924 v dr = 100 v i f = 0 i - off-state c u rrent (na) drm - 250 - 200 - 150 - 100 - 50 0 50 100 150 200 250 - 2.5 - 2.0 - 1.5 - 1.0 - 0.5 0.0 0.5 1.0 1.5 2.0 2.5 v tm - on-state v oltage ( v ) 96 11925 i - on-state c u rrent (ma) tm i ft = 15 ma 14770 6.4 max. 7.62 0.1 b 0.4 b technical dra w ings according to di n specifications w eight: ca. 0.50 g creepage distance: > 6 mm air path: > 6 mm after mo u nting on pc b oard 1 2 3 6 5 4 8 . 8 max. 8 .6 max. 1.54 4.2 0.1 2.54 nom. 5.0 8 nom. 0.5 8 max. 3.3 0.5 min. 0.3 a a 9 0.6 0.3 max.
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 83504 524 rev. 1.9, 10-dec-08 k3010p, k3010pg series vishay semiconductors optocoupler, phototriac output, 250 v v drm 14771 8 . 8 max. 8 .6 max. 0.3 max. 6.4 max. 1.54 technical dra w ings according to di n specifications w eight: ca. 0.50 g creepage distance: > 8 mm air path: > 8 mm after mo u nting on pc b oard 4.2 0.1 10.16 0.2 7.62 0.1 2.54 nom. 5.0 8 nom. 0.5 8 max. 5.0 8 max. 3.3 0.5 min. 1 2 3 6 5 4 0.4 0.3 b a a b
document number: 83504 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.9, 10-dec-08 525 k3010p, k3010pg series optocoupler, phototriac output, 250 v v drm vishay semiconductors ozone depleting substa nces policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve t he performance of our products, processes, distribution and o perating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. it is particular concern to control or eliminate releases of those substances in to the atmosphere whic h are known as ozone depleting substances (odss). the montreal protocol (1987) a nd its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. vari ous national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its policy of co ntinuous improvements to elim inate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively. 2. class i and ii ozone depleting substances in the clean air ac t amendments of 1990 by the environmental protection agency (epa) in the usa. 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify t hat our semiconductors are not manufactured with ozone dep leting substances and do not contain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating para meters must be validated for each customer application by the customer. should the buyer use vishay semiconductors products for any unintended or unauthorized application, the buyer shall indemnify vishay semiconductors against all claims, costs, dam ages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death as sociated with such unint ended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
